AAA Iron Chelate 13% EDTA

Fe EDTA 13% is a source of chelated Iron (Fe) essential for chlorophyll production and lignin development for plants grown in acidic waters.

Guaranteed Analysis

Iron(fe) ………………….13%

13% Chelated Iron(Fe)

Mix package in a 500ml container of distilled or RO water.  Dosing 2ml per 38L (10 US gallons) will raise Fe to Estimative index levels of 0.48ppm

The target is 0.2-0.5 ppm per week if you use EI METHOD 

Amounts above are for reference only.  Your planted aquarium may need more or less depending on many factors.

Handling: Wash thoroughly after handling. Use with adequate ventilation. Minimize dust generation and accumulation. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Transfer Equipment: Handle this material with tools and equipment, which are nonreactive such as chemicalresistant plastic or stainless steel tanks, pumps, valves, etc. Storage: Store in a tightly closed container. Store in plastic or stainless steel container in a cool, well- ventilated, dry place at temperatures above 40°F. Prolonged storage at elevated temperatures should be avoided. Store away from incompatible substances. Avoid contact with aluminum, copper, copper alloys, nickel and zinc. Do not store near food or feeds. Do not stack pallets more than two (2) high. Hygienic Work Practices:  Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday.

Engineering Controls: Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.

Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA’s eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin: Wear appropriate protective gloves to prevent skin exposure. Clothing: Wear appropriate protective clothing to prevent skin exposure. Respirators: A respiratory protection program that meets OSHA’s 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant respirator use. Hygienic Work Practices:  Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday

AVERTISSEMENT: conserver dans un endroit frais et sombre hors de la portée des enfants.  Pas pour la consommation humaine